Graepel-30-Round6

The Graepel-30-Round6 ladder rung is 30 mm wide, 30 mm high and has three rows of holes which are staggered with upward-facing perforations (d = 6 mm). The longitudinal divider measures 21 mm. This rung is offered with a fixed measure of 318 mm (including a jog for clearance of 300 mm between the individual spars) for being welded to a pillar (d = 27 mm), or as uncut bar stock 2,000 mm long without a jog, which can be cut to length individually.

This rung complies with DIN EN ISO 14122. 

Options:

1. Graepel-30-Round6 with inside bending 

This variant of Graepel-30-Round6 has inner edges on both sides. This makes it easier to hold on to the rungs. This rung is offered with a fixed measure of 318 mm (including a jog for clearance of 300 mm) for welding to a pipe (d = 27 mm), or as uncut bar stock 2,000 mm long without a jog. The bar can be cut to length individually.

2. Graepel-30-Round6 with an unperforated edge

This variant of Graepel-30-Round6 omits the jog in the perforated field, so this variant does not feature any cut perforations. This rung is only offered with a fixed measure of 318 mm (including a jog for clearance of 300 mm between the individual spars) and can be welded to a pipe (d = 27 mm).

3. Graepel-30-Rund6 for central stile ladders

This variant is intended for use on single stile ladders. It can be welded in the middle and has small bevels at the outer ends to prevent it from slipping. The typical perforation ensures slip resistance.

back to overview

We will be glad to advise you.

Our employees look forward to hearing from you.

Contact us